Allied Telesis AT-DC2552XS - Manual (Page 157)

157
Chapter 7
Event Log Commands
The event log commands are summarized in Table 23.
Table 23. Event Log Commands
Command Mode Description
“CLEAR LOG” on page 158 Privileged Exec Deletes entries in the buffered or
permanent log.
“DEFAULT LOG” on page 159 Global
Configuration Sets the specified log to default
settings.
“LOG” on page 161 Global
Configuration Starts logging event messages to the
specified destination.
“LOG (FILTER)” on page 162 Global
Configuration Specifies filtering criteria to the
specified destination.
“LOG HOST TIME” on page 165 Global
Configuration Specifies the time for event messages
stored in a syslog server.
“LOG SIZE” on page 167 Global
Configuration Specifies the maximum size of
memory, in Kbytes, that the switch
stores event messages.
“NO LOG” on page 168 Global
Configuration Stops sending event messages to the
specified destination.
“SHOW LOG” on page 170 Privileged Exec Displays the event messages in the
buffered log.
“SHOW LOG CONFIG” on page 172 Privileged Exec Displays the configuration of event
logs.
“SHOW LOG PERMANENT” on
page 175 Privileged Exec Displays the event messages in the
permanent log.
“TERMINAL MONITOR” on page 177 Privileged Exec Displays event messages on the
console terminal.