Allied Telesis AT-DC2552XS - Manual (Page 479)

479
Chapter 21
Quality of Service (QoS) Commands
The Quality of Service (QoS) commands are summarized in Table 76 and
described in detail in this chapter.
Table 76. Quality of Service Commands
Command Mode Description
“CLASS” on page 481 Policy Map
Configuration Associates an existing class map to a
policy map.
“CLASS-MAP” on page 483 Global
Configuration Creates a class map and enters the
Class Map Configuration mode.
“DEFAULT-ACTION” on page 485 Policy map
Configuration Sets the action for the default class-
map belonging to the specified policy
map.
“DESCRIPTION (Policy Map)” on
page 487 Policy Map
Configuration Adds a description of the policy map.
“MATCH ACCESS-GROUP” on
page 489 Class Map
Configuration Adds a hardware ACL to a class map.
“MATCH COS” on page 491 Class Map
Configuration Sets the value of the Class of Service
(CoS) for a class-map.
“MATCH DSCP” on page 492 Class Map
Configuration Sets the value of DSCP to a class
map.
“MATCH ETH-FORMAT PROTOCOL”
on page 493 Class Map
Configuration Adds an Ethernet frame format and
Layer 3 protocol as matching criteria
to a class map.
“MATCH IP-PRECEDENCE” on
page 496 Class Map
Configuration Sets the value of IP precedence to a
class map.
“MATCH MAC-TYPE” on page 497 Class Map
Configuration Sets the MAC address type to a class
map.
“MATCH TCP-FLAGS” on page 499 Class Map
Configuration Sets one or more TCP flags for a
class map.
“MATCH VLAN” on page 501 Class Map
Configuration Sets a VLAN ID for a class map.