Allied Telesis AT-DC2552XS - Manual (Page 153)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 153
SHOW BOOT
Syntax
show boot
Parameter
None
Mode
Privileged Exec mode
Description
Use this command to display the names of the management software and
boot configuration file. See Figure 30 for an example of the command
output.
Figure 30. SHOW BOOT Command
The fields are described in Figure 22.
Table 22. SHOW BOOT Command
Field Description
Current software Displays the file name of the management
software that is currently loaded on the switch.
Current boot image Displays the file name of the management
software that is loaded on the switch next time the
switch reboots.
Default boot config Displays the name of the default boot
configuration file. Always displays “/config/
boot.cfg.” When the BOOT-CONFIG-FILE
command has never issued on the switch, the
switch uses this file to configure itself when
rebooting.
Current software : DC-2.5.1.1.img
Current boot image : DC-2.5.1.1.img
Default boot config : /config/boot.cfg
Current boot config : /config/boot.cfg (file exists)