Allied Telesis AT-DC2552XS - Manual (Page 67)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 67
TERMINAL LENGTH
Syntax
terminal length length
Parameter
length
Specifies the maximum number of lines that the SHOW commands
display on the screen at once. The range is 0 to 512 lines. Assign a
value of 0 if you do not want the SHOW commands to pause. The
default value is 20 lines.
Mode
User Exec mode
Description
Use this command to specify the maximum number of lines that the
SHOW commands display on the screen at once in your current session.
The setting of this command is effective only for your current session and
is not stored in the running configuration. This command overrides the
settings by the SERVICE TERMINAL-LENGTH and LENGTH commands.
Confirmation Command
None
Example
This example sets the maximum number of lines to 30 for your current
session:
awplus> enable
awplus# terminal length 30