Allied Telesis AT-DC2552XS - Manual (Page 187)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 187
NO SNMP-SERVER HOST
Syntaxes
no snmp-server host ipaddress traps version 1 community
no snmp-server host ipaddress traps|informs version 2c
community
no snmp-server host ipaddress traps|informs version 3
auth|priv|noauth user
Parameters
ipaddress
Specifies the IPv4 address of a recipient of SNMP trap or inform
notifications that the switch sends.
traps
Specifies traps as the message type. With SNMP version 1, the
message type can only be traps.
informs
Specifies informs as the message type.
community
Specifies an SNMPv1 and SNMPv2c community string. A
community string is case-sensitive. When version 1 or 2c is
specified, you must specify a community string.
auth
Specifies authentication as the minimum security level. When
version 3 is specified, you must specify authentication, privacy, or
no authentication.
priv
Specifies privacy as the minimum security level. When version 3 is
specified, you must specify authentication, privacy, or no
authentication.
noauth
Specifies no authentication as the minimum security level. When
version 3 is specified, you must specify authentication, privacy, or
no authentication.
user
Specifies the name of an SNMPv3 user. The name is case-
sensitive.