Allied Telesis AT-DC2552XS - Manual (Page 544)

Chapter 22: DoS Defense Commands
544 Section V: Security and Traffic Control
SHOW DOS INTERFACE
Syntax
show dos interface port_ids
Parameter
port_ids
Specifies a port ID or multiple port IDs. Use a comma (,) to
separate port IDs and a hyphen (-) to indicate a range of port IDs.
Description
Use this command to display the configurations of the DoS defenses on
the ports. The state of a defense is either enabled or disabled. See
Figure 80 for an example of this command.
Figure 80. SHOW DOS INTERFACE Command
The fields are described in Table 84.
Table 84. SHOW DOS INTERFACE Command
Field Description
Port status Displays the status of the port as enabled or
disabled.
synflood Displays the status of the DoS SYN flood defense
as enabled or disabled on the port.
smurf Displays the status of the DoS SMURF defense
as enabled or disabled on the port.
DoS settings for interface port1.0.9
----------------------------------------
Port status
: Enabled
synflood : Disabled
smurf : Disabled
land : Disabled
ipoptions : Enabled
Action : Shutdown port
Attacks detected : 0
teardrop : Disabled
ping-of-death : Disabled