Allied Telesis AT-DC2552XS - Manual (Page 399)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 399
SHOW IP RRP SNOOPING
Syntax
show ip rrp snooping
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to display information about RRP Snooping. Figure 64
is an example of the command output.
Figure 64. SHOW IP RRP SNOOPING Command
The fields are described inTable 66.
Table 66. SHOW IP RRP SNOOPING Command
Field Description
Status Displays whether RRP Snooping is
enabled or disabled.
Vlan Displays the VLAN ID.
Master Displays the port ID connected to the
master router or the network of the master
router.
Virtual MAC Address Displays the virtual MAC address of the
router.
UpTime Displays the time that the current master
router has been the master router.
RRP Snooping
----------------------------------------------------------
Status ........................Enabled
Vlan Master Virtual MAC Address UpTime
--------------------------------------------------------
1
1.0.5 00:00:5e:00:01:0a 0 days 00:00:12
----------------------------------------------------------