Clear mac address-table – Allied Telesis AT-DC2552XS User Manual
Page 386
Chapter 15: MAC Address Table Commands
386
CLEAR MAC ADDRESS-TABLE
Syntax
clear mac address-table static|dynamic [vlan
vid
|interface
port_id
s|address
macaddress
]
Parameters
static
Deletes static addresses.
dynamic
Deletes dynamic MAC addresses.
vid
Specifies the VLAN ID. MAC addresses that belong to the VLAN
are deleted. The range is 1 to 4094.
port_ids
Specifies the port ID. When specifying the DYNAMIC keyword, you
can specify multiple port IDs. MAC addresses associated with the
specified to the port ID are deleted. Use a comma (,) to separate
port IDs and a hyphen (-) to indicate the range of port IDs.
macaddress
Specifies the MAC address you want to delete from the switch’s
MAC address table. The address must be specified in the following
format: xx:xx:xx:xx:xx:xx.
Mode
Privileged Exec mode
Description
Use this command to delete addresses from the MAC address table. You
can delete MAC address entries listed in the Switching Forwarding
Database section of the MAC address table. To display these MAC
addresses, use the SHOW MAC ADDRESS TABLE command. See
“SHOW MAC ADDRESS-TABLE” on page 394. To delete the Multicast
Switch Forwarding Database section of the MAC address table, use the
CLEAR IP IGMP command. See “CLEAR IP IGMP” on page 426
Confirmation Command