Allied Telesis AT-DC2552XS - Manual (Page 149)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 149
COPY RUNNING-CONFIG STARTUP-CONFIG
Syntax
copy running-config startup-config
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to save the switch’s current configuration file (running-
config file) onto the boot configuration file (startup-config file). When you
enter the command, the switch copies the current parameter settings in
the RAM memory into the boot configuration file in the FLASH memory.
This command is equivalent to “WRITE” on page 156.
Note
Parameter changes in the current management session that are not
saved by this command or the WRITE command are discarded
when you power off or reset the switch.
Example
This example saves the switch’s current configuration settings onto the
boot configuration file (startup-config file):
awplus# copy running-config startup-config