Allied Telesis AT-DC2552XS - Manual (Page 60)

Chapter 2: Management Session Commands
60 Section I: Switch Management
SHOW BAUD-RATE
Syntax
show baud-rate
Parameters
None
Mode
User Exec mode
Description
Use this command to display the Console port settings, which are used for
local management sessions on the switch. See Figure 9 for an example of
the command output.
Figure 9. SHOW BAUD-RATE Command
The fields are described in Table 3.
Note
The Baud Rate is the only adjustable parameter on the Console
port.
Table 3. SHOW BAUD-RATE Command
Field Description
Baud Rate Displays the speed of the data transmission in bps on
the Console port.
Parity Displays the type of parity checking. It is always is set to
“None.”
Data bits Displays the length of data bits. It is always set to “8.”
Stop bits Displays the length of stop bits. It is always set to “1.”
Asynchronous Port (Console) Information:
Baud Rate .................... 115200
Parity ....................... None
Data bits .................... 8
Stop bits .................... 1