Allied Telesis AT-DC2552XS - Manual (Page 64)

Chapter 2: Management Session Commands
64 Section I: Switch Management
SHOW TELNET
Syntax
show telnet
Parameters
None
Modes
User Exec mode and Privileged Exec mode
Description
Use this command to display the status of the Telnet server on the switch.
The status of the Telnet server can be either enabled or disabled. See
Figure 12 for an example of the command output.
Figure 12. SHOW TELNET Command
Example
This example displays the status of the Telnet server on the switch:
awplus# show telnet
Telnet Server Configuration
-------------------------------------------------------
Telnet Server: Enabled