Allied Telesis AT-DC2552XS - Manual (Page 203)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 203
SNMP-SERVER ENABLE TRAP
Syntax
snmp-server enable trap [auth|rmon]
Parameters
auth
Specifies SNMP authentication traps.
rmon
Specifies RMON SNMP traps for remote monitoring.
Mode
Global Configuration mode
Description
Use this command to enable the transmission of SNMP notifications of
authentication traps, remote monitoring (RMON) traps, or both. If you do
not specify a parameter when you enter this command, the software
enables both authenticator traps and RMON traps. By default, the
transmission of both authentication traps and RMON traps is disabled.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 116
Examples
This example enables the transmission of both authentication traps and
RMON traps:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server enable trap
This example enables the transmission of only authentication traps:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server enable trap auth