Allied Telesis AT-DC2552XS - Manual (Page 33)

33
Chapter 2
Management Session Commands
The management session commands are summarized in Table 1.
Table 1. Management Session Commands
Command Mode Description
“BAUD-RATE SET” on page 36 Global
Configuration Sets the baud rate of the Console
port.
“CLEAR LINE” on page 37 Privileged Exec Ends a remote management session
on another line.
“CRYPTO KEY DESTROY
HOSTKEY” on page 38 Global
Configuration Deletes an encryption key pair for the
SSH server.
“CRYPTO KEY GENERATE
HOSTKEY” on page 40 Global
Configuration Creates or updates an encryption key
pair for the SSH server.
“EXEC-TIMEOUT” on page 42 Console Line and
Virtual Terminal
Line Sets the management session timers.
“LENGTH” on page 44 Console Line and
Virtual Terminal
Line Sets the maximum number of lines
that the SHOW commands display on
the screen for local and remote
management sessions.
“LINE CONSOLE 0” on page 46 Global
Configuration Enters the Console Line mode.
“LINE VTY” on page 47 Global
Configuration Enters the Virtual Terminal Line mode.
“NO EXEC-TIMEOUT” on page 48 Console Line and
Virtual Terminal
Line Resets the management session
timers to 10 minutes.
“NO LENGTH” on page 49 Console Line and
Virtual Terminal
Line Resets the maximum number of lines
the SHOW commands display on the
screen to 20 lines for local and remote
management sessions.
“NO SERVICE SSH” on page 50 Global
Configuration Disables the SSH server on the
switch.