Exec-timeout – Allied Telesis AT-DC2552XS User Manual
Page 42
Chapter 2: Management Session Commands
42
EXEC-TIMEOUT
Syntax
exec-timeout
value
Parameter
value
Specifies the session timer in minutes. The range is 0 to 35,791
minutes. Assign a value of 0 if you do not want to time out a
session. The default value is 10 minutes.
Modes
Console Line and Virtual Terminal Line modes
Description
Use this command to set the management session timers. The timers are
used by the switch to end inactive management sessions. The switch
deems a management session inactive when a management session has
no activity for the duration of a timer.
Local management sessions, which are conducted through the Console
port on the switch, and remote Telnet and SSH sessions have different
timers. To set the timer for local management sessions, enter the
command in the Line Console mode. To set the timers for remote Telnet
and SSH sessions, enter the command in the Virtual Terminal Line mode.
Confirmation Command
Examples
This example sets the session timer for local management sessions to 0
minutes which indicates to not time out sessions:
awplus> enable
awplus# configure terminal
awplus(config)# line console 0
awplus(config-line)# exec-timeout 0