Allied Telesis AT-DC2552XS - Manual (Page 198)

Chapter 8: SNMP Commands
198 Section I: Switch Management
SHOW SNMP-SERVER USER
Syntax
show snmp-server user
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the SNMPv3 users and their settings on the
switch. See Figure 38 for an example.
Figure 38. SHOW SNMP-SERVER USER Command
The fields in the entries are described in Table 31.
Example
The following example displays the SNMPv3 users and their settings:
awplus# show snmp-server user
Table 31. SHOW SNMP-SERVER USER Command
Field Description
Name Displays the user name.
Auth Displays the authentication algorithm.
Privacy Displays the encryption algorithm.
Name Auth Privacy
------- ------- ----------
supervisor SHA DES
administrator MD5 DES
zein MD5 none