Allied Telesis AT-DC2552XS - Manual (Page 316)

Chapter 13: VLAN Commands
316 Section II: Layer 2 Switching
SHOW VLAN MACADDRESS
Syntax
show vlan macaddress
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the MAC addresses and the egress ports of
the MAC address-based VLANs on the switch. See Figure 58 for an
example.
.
Figure 58. SHOW VLAN MACADDRESS Command
The fields are described in Table 56.
Table 56. SHOW VLAN MACADDRESS Command
Parameter Description
VLAN VID MAC
Associations Indicates the VID of the MAC address-
based VLAN.
Total Number of Associate
MAC Addresses Indicates the total number of MAC
addresses that are assigned to the VLAN.
VLAN 10 MAC Associations:
Total number of associated MAC addresses: 2
-------------------------------------------------
MAC Address
Ports
-------------------------------------------------
00:00:00:01:01:01
port1.0.1-port1.0.24
00:00:00:01:01:02 port1.0.1-port1.0.24
-------------------------------------------------
VLAN 20 MAC Associations:
Total number of associated MAC addresses: 1
-------------------------------------------------
MAC Address
Ports
-------------------------------------------------
00:00:00:02:02:01
port1.0.1-port1.0.24
00:00:00:02:02:02 port1.0.1-port1.0.24