Allied Telesis AT-DC2552XS - Manual (Page 253)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 253
NO FLOWCONTROL
Syntax
no flowcontrol
Parameters
None
Mode
Port Interface mode
Description
Use this command to disable flow control on ports to respond to receive
PAUSE packets.
This command is equivalent to the FLOWCONTROL RECEIVE OFF
command. See “FLOWCONTROL RECEIVE” on page 245.
Confirmation Command
“SHOW FLOWCONTROL INTERFACE” on page 258
Example
This example disables flow control on ports 1.0.20 through port 1.0.24:
awplus(config)# interface port1.0.20,port1.0.24
awplus(config-if)# no flowcontrol