Allied Telesis AT-DC2552XS - Manual (Page 145)

145
Chapter 6
Boot Configuration File Commands
The boot configuration file commands are summarized in Table 21.
Table 21. Boot Configuration File Commands
Command Mode Description
“BOOT CONFIG-FILE” on page 146 Global
Configuration Designates or creates a new boot
configuration file (startup-config file)
for the switch.
“COPY RUNNING-CONFIG” on
page 148 Privileged Exec Creates a new boot configuration file
that contains the current settings of
the switch.
“COPY RUNNING-CONFIG
STARTUP-CONFIG” on page 149 Privileged Exec Saves the switch’s current
configuration (running-config file) to
the boot configuration file (startup-
config file).
“COPY STARTUP-CONFIG” on
page 15088 Privileged Exec Saves a configuration file in the switch
as the startup configuration file.
“ERASE STARTUP-CONFIG” on
page 151 Privileged Exec Deletes the boot configuration file
(startup-config file) and returns the
switch to its default settings.
“NO BOOT CONFIG-FILE” on
page 152 Global
Configuration Designates the default BOOT.CFG file
as the boot configuration file on the
switch.
“SHOW BOOT” on page 153 Privileged Exec Displays the names of the boot
configuration file and the configuration
file that was used by the switch during
the last reset or power cycle.
“SHOW STARTUP-CONFIG” on
page 155 Privileged Exec Displays the contents of the boot
configuration file (startup-config file).
“WRITE” on page 156 Privileged Exec Saves the switch’s current
configuration to the boot configuration
file (startup-config file).