Allied Telesis AT-DC2552XS - Manual (Page 162)

Chapter 7: Event Log Commands
162 Section I: Switch Management
LOG (FILTER)
Syntax
log buffered|permanent|monitor|console|host ipv4_address
[level level |program program_name |msgtext text_string ]
Parameters
buffered
Adds filtering criteria to the buffered log.
permanent
Adds filtering criteria to the permanent log.
monitor
Adds filtering criteria to the terminal monitor log.
console
Adds filtering criteria to the console log.
host
Adds filtering criteria to the syslog server.
ipv4_address
Specifies the IPv4 address of the syslog server.
level
Specifies one of eight message levels as a filtering criterion. You
can specify either a keyword or level number, where 0 is the
highest level and 7 is the lowest level. The switch sends event
messages with the specified level and higher levels than the
specified level.
– emergency: Specifies the emergency level of event
messages that the switch sends to the destination. The
emergency level message is the highest level and indicates
the system is not usable. Emergency is defined as level
number 0.
– alert: Specifies the alert level of event messages that the
switch sends to the destination. The alert level messages
indicates that the system needs an immediate attention. Alert
is defined as level number 1.
– critical: Specifies the critical level of event messages that the
switch sends to the destination. Critical is defined as level
number 2.