Copy zmodem – Allied Telesis AT-DC2552XS User Manual
Page 138
Chapter 5: File Management Commands
138
COPY ZMODEM
Syntax
copy [
filename
] zmodem
Parameter
filename
Specifies the name of a file you want to upload. You cannot specify
a file with the file extension “img.”
Mode
Privileged Exec mode
Description
Use this command together with a Zmodem utility to upload a file in the
switch to the terminal or management workstation and download a file on
the terminal or management workstation to the file system in the switch.
You must use a Console terminal that support a Zmodem utility to use this
command.
To upload a file on the file system in the switch to the terminal or
management workstation, specify the filename parameter. You are not
allowed to upload a file with the file extension “img” using a Zmodem
utility.
To download a file in the terminal or management workstation to the
switch, you must specify a file using a Zmodem utility. The switch accepts
the file extensions: “bin,” “cfg,” “img,” “inf,” “ldr,” “sys,” “tmp,” “txt,” “ukf,”
“key,” “cer,” “csr,” “log,” or “tgz.”
Examples
This command uploads the configuration file “test.cfg” on the file system in
the switch to the terminal or management workstation:
awplus# copy test.cfg zmodem
This command downloads the configuration file “test2.cfg” by an operation
on the Zmodem utility on the terminal or the management workstation:
awplus# copy zmodem