Allied Telesis AT-DC2552XS - Manual (Page 192)

Chapter 8: SNMP Commands
192 Section I: Switch Management
NO SNMP TRAP LINK-STATUS
Syntax
no snmp trap link-status
Parameters
None
Mode
Port Interface mode
Description
Use this command to disable the transmission of SNMP link status traps
“linkUp” and “linkDown” when ports establish links or lose links to network
devices.
Confirmation Command
“SHOW INTERFACE” on page 260
Example
This example disables the transmission of link status traps on ports 1.0.17
and 1.0.21:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.17,port1.0.21
awplus(config-if)# no snmp trap link-status