Allied Telesis AT-DC2552XS - Manual (Page 314)

Chapter 13: VLAN Commands
314 Section II: Layer 2 Switching
SHOW VLAN
Syntax
show vlan
Parameters
None
Modes
User Exec mode and Privileged Exec mode
Description
Use this command to display all the tagged and untagged VLANs on the
switch. See Figure 57 for an example.
Figure 57. SHOW VLAN Command
VLAN ID Name Type State Member ports
(u)-Untagged, (t)-Tagged
======= ======== ====== ======= ============================
1 default STATIC ACTIVE port1.0.49(u)
10 orange STATIC ACTIVE port1.0.1(u) port1.0.2(u)
port1.0.3(u) port1.0.4(u)
port1.0.5(u) port1.0.6(u)
port1.0.7(u) port1.0.8(u)
port1.0.9(u) port1.0.10(u)
port1.0.11(u) port1.0.12(u)
port1.0.13(u) port1.0.14(u)
port1.0.15(u) port1.0.16(u)
port1.0.49(t)
20 white STATIC ACTIVE port1.0.17(u) port1.0.18(u)
port1.0.19(u) port1.0.20(u)
port1.0.21(u) port1.0.22(u)
port1.0.23(u) port1.0.24(u)
port1.0.25(u) port1.0.26(u)
port1.0.27(u) port1.0.28(u)
port1.0.29(u) port1.0.30(u)
port1.0.31(u) port1.0.32(u)
port1.0.49(t)
30 beige STATIC ACTIVE port1.0.33(u) port1.0.34(u)
port1.0.35(u) port1.0.36(u)
port1.0.37(u) port1.0.38(u)
port1.0.39(u) port1.0.40(u)
port1.0.41(u) port1.0.42(u)
port1.0.43(u) port1.0.44(u)
port1.0.45(u) port1.0.46(u)
port1.0.47(u) port1.0.48(u)
port1.0.49(t)
100 VLAN0100 STATIC ACTIVE port1.0.53(u) port1.0.57(u)
port1.0.61(u)