Allied Telesis AT-DC2552XS - Manual (Page 195)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 195
SHOW SNMP-SERVER COMMUNITY
Syntax
show snmp-server community
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the SNMPv1 and SNMPv2c community
strings and their settings on the switch. Here is an example of the display.
Figure 36. SHOW SNMP-SERVER COMMUNITY Command
The fields in the entries are described in Table 29.
Example
This example displays the SNMPv1 and SNMPv2c community strings and
their settings:
awplus# show snmp-server community
Table 29. SHOW SNMP-SERVER COMMUNITY Command
Parameter Description
Community Name Displays the community string.
Access Displays the access level of the
community string. The options are:
 Read-Write
 Read-Only.
View Not supported. Always displays none.
SNMP community information:
Community Name ............. private
Access .................. Read-Write
View .................... none
Community Name ............. public
Access .................. Read-only
View .................... none