Allied Telesis AT-DC2552XS - Manual (Page 455)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section V: Security and Traffic Control 455
4: Source Quench
5: Redirect
8: Echo Request
9: Router Advertisement
10: Router Solicitation
11: Time Exceeded
12: Parameter Problem
13: Timestamp
14: Timestamp Reply
15: Information Request
16: Information Reply
17: Address Mask Request
18: Address Mask Replay
src_port_no
Specifies source TCP or UDP port numbers. The range is 0 to
65535. To specify port numbers, use one of the following formulas:
– eq src_port_no: Matches a packets whose port number is
equal to the specified port number.
– lt src_port_no: Matches packets whose port number is less
than the specified port number.
– gt src_port_no: Matches packets whose port number is
greater than the specified port number.
– ne src_port_no: Matches a packet whose port number is not
equal to the specified port number.
– range src_port_no src_port_no: Matches packets whose port
number is within the range.
dst_port_no
Specifies destination TCP or UDP port numbers. The range is 0 to
65535. To specify port numbers, use one of the formulas described
in the src_port_no parameter.
Mode
Hardware Access List mode