Allied Telesis AT-DC2552XS - Manual (Page 122)

Chapter 4: Basic Switch Operations Commands
122 Section I: Switch Management
SHOW SYSTEM ENVIRONMENT
Syntax
show system environment
Parameters
None
Mode
Privilege Exec mode
Description
Use this command to display information about the switch, PSUs, and fan
modules. See Figure 23 for an example of this information.
Figure 23. SHOW SYSTEM ENVIRONMENT Command
Environment Monitoring Status
Overall Status: Normal
Resource ID: 01 Name: AT-DC2552XS
ID Sensor (Units) Reading Low Limit High Limit Status
1 VCC3V3 Yes - - OK
2 MAC1V Yes - - OK
3 DDRvV5 Yes - - OK
4 PHY1VL Yes - - OK
5 PHY1VR Yes - - OK
6 Temp: Near CPU (Degrees C) 33 - - Ok
7 Temp: Near MAC (Degrees C) 45 - - Ok
8 Temp: PHY left (Degrees C) 49 - - Ok
9 Temp: PHY right (Degrees C) 45 - - Ok
Resource ID: 02 Name: AT-DC2552XS
ID Sensor (Units) Reading Low Limit High Limit Status
1 Device Present Yes - - Ok
2 PSU Connection Yes - - Ok
3 PSU Overtemp Yes - - Ok
4 PSU Fan Fail Yes - - Ok