beautypg.com

Port-channel load-balance – Allied Telesis AT-DC2552XS User Manual

Page 286

background image

Chapter 12: LACP Commands

286

Section II: Layer 2 Switching

PORT-CHANNEL LOAD-BALANCE

Syntax

port-channel load-balance src-mac|dst-mac|src-dst-mac|
src-ip|dst-ip|src-dst-ip

Parameters

src-mac

Specifies source MAC address as the load distribution method.

dst-mac

Specifies destination MAC address.

src-dst-mac

Specifies both the source address and the destination MAC
address.

src-ip

Specifies source IP address.

dst-ip

Specifies destination IP address.

src-dst-ip

Specifies both the source address and the destination IP address.

Mode

Port Interface mode

Description

Use this command to set the load distribution methods of a trunk group. A
trunk group can have only one load distribution method.

This command can be applied only to dynamic LACP and static trunk
groups. To enter the Port Interface mode for a specific trunk group, enter
the INTERFACE command with the ID number of the trunk group.

Confirmation Command

“SHOW ETHERCHANNEL DETAIL” on page 290