Allied Telesis AT-DC2552XS - Manual (Page 184)

Chapter 8: SNMP Commands
184 Section I: Switch Management
NO SNMP-SERVER ENABLE TRAP
Syntax
no snmp-server enable trap [auth|rmon]
Parameters
auth
Specifies SNMP authentication traps.
rmon
Specifies Remote Monitoring (RMON) SNMP traps.
Mode
Global Configuration mode
Description
Use this command to disable the transmission of authentication traps,
RMON traps, or both. If you do not specify a keyword, the command
disables both authentication traps and RMON traps.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 116
Examples
This example disables the transmission of SNMP authentication traps:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server enable trap auth
This example disables the transmission of both SNMP authentication
traps and RMON traps:
awplus> enable
awplus# configure terminal
awplus(config)# no snmp-server enable trap