Allied Telesis AT-DC2552XS - Manual (Page 177)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 177
TERMINAL MONITOR
Syntax
terminal monitor
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to output event messages defined as the monitor log
on the Console monitor. By default, the switch outputs event messages
with all levels. You can change the event message filtering criteria using
the LOG (FILTER) command. See “LOG (FILTER)” on page 162.
To stop displaying event messages on the Console monitor, use the
TERMINAL NO MONITOR command.
Note
You can execute the TERMINAL MONITOR and TERMINAL NO
MONITOR commands from remote management sessions;
however, the switch displays event messages defined as the
monitor log only on the console monitor.
Examples
This example outputs event messages on the console terminal.
awplus# terminal monitor
This example stops displaying event messages on the console terminal.
awplus# terminal no monitor