Allied Telesis AT-DC2552XS - Manual (Page 105)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 105
SHOW CLOCK
Syntax
show clock
Parameters
None
Modes
User Exec and Privilege Exec modes
Description
Use this command to display the system’s current date and time. When
the NTP client is enabled, this command displays the local time as well as
the Coordinated Universal Time (UTC) and the time zone offset.
See Figure 15 for an example of the command output.
Figure 15. SHOW CLOCK Command
The fields are described in Table 9.
Example
This example displays the system’s current date and time:
awplus> show clock
Table 9. SHOW CLOCK Command
Field Description
Local Time Displays the system’s current date and time.
UTC Time Displays the Coordinated Universal Time (UTC)
only when the NTP client is enabled.
Timezone Offset Displays the offset from UTC only when the NTP is
enabled.
Local Time; Mon, 2 Jul 2012 14:43:10
UTC Time: Mon, 2 Jul 2012 22:43:10
Timezone Offset; -08:00