Allied Telesis AT-DC2552XS - Manual (Page 91)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 91
BANNER MOTD
Syntax
banner motd
Parameters
None
Mode
Global Configuration mode
Description
Use this command to create a message-of-the-day banner. The message
is displayed prior to the login user name and password prompts. If the
switch also has a login banner, this message is displayed first.
After you enter the command, the prompt “Type CTRL/D to finish” is
displayed on your screen. Enter a message-of-the-day banner of up to 255
alphanumeric characters. Spaces, special characters except “!” and “?”,
and carriage returns are allowed. When you are finished, hold down the
CTRL key and type D.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 116
Example
This example create a message-of-the-day banner:
awplus> enable
awplus# configure terminal
awplus(config)# banner motd
Type CTRL/D to finish
*** Authorized User Only ***