Allied Telesis AT-DC2552XS - Manual (Page 411)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section III: IPv4 Management 411
PING
Syntax
ping ipaddress
Parameter
ipaddress
Specifies the IPv4 address of the network device. You can specify
only one IP address.
Modes
Privileged Exec mode
Description
Use this command to instruct the switch to send ICMP Echo Requests to a
network device with the IPv4 address specified. You may want to use the
command to determine whether an active link is available between the
switch and another network device.
Example
This command instructs the switch to ping a network device with an IP
address of 192.168.1.32
awplus> enable
awplus# ping 192.168.1.32
The results of the ping are displayed on the screen.