Allied Telesis AT-DC2552XS - Manual (Page 103)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 103
SHOW BOOT
Syntax
show boot
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the information about the management
software and configuration file. See Figure 14 for an example of the
output.
Figure 14. SHOW BOOT Command
The fields are described in Table 8.
Table 8. SHOW BOOT Command
Field Description
Current software Displays the name of the management software
file that is currently loaded on the switch.
Current boot image Displays the name of the management software
file that will be loaded when the system is
rebooted or reloaded.
Default boot config Displays the name of the default boot
configuration file. It is always “/config/boot.cfg.”
Current boot config Displays the name of the boot configuration file
that will be used when the system is rebooted or
reloaded.
Current software: ....... DC-2.5.1.1.img
Current boot image: ..... DC-2.5.1.1.img
Default boot config:..... /config/boot.cfg
Current boot config:....../config/boot.cfg (file exists)