Show interface status – Allied Telesis AT-DC2552XS User Manual
Page 265
AT-DC2552SX Switch Command Line Interface User’s Guide
265
SHOW INTERFACE STATUS
Syntax
show interface [
port_ids
|eth0] status
Parameters
port_ids
Specifies a port ID or multiple port IDs. Use a comma (,) to
separate port IDs and a hyphen (-) to indicate a range of port IDs.
eth0
Specifies to display the management Ethernet port.
Modes
Privileged Exec mode
Description
Use this command to display the link status, VLAN settings, duplex mode,
speed, and connected media type of the specified ports. When you do not
specify port IDs or eth0, the switch displays the statuses of the all the
ports. See Figure 47 for an example of the information.
Figure 47. SHOW PLATFORM PORT COUNTERS
Port
Name
Status
Vlan
Duplex
Speed
Type
port1.0.1
connected
1
full
10G
10GBASE-SR
port1.0.2
connected
1
full
10G
10GBASE-SR
port1.0.3
not connect
1
full
10G
not present
....
port1.0.49
not connect
1
full
40G
not present
port1.0.53
not connect
1
full
40G
not present
port1.0.57
not connect
1
full
40G
not present
port1.0.61
not connect
1
full
40G
not present
eth0
connected
none
a-half
a-10
1000Base-T