Allied Telesis AT-DC2552XS - Manual (Page 180)

Chapter 8: SNMP Commands
180 Section I: Switch Management
“SHOW SNMP-SERVER
COMMUNITY” on page 195 Privileged Exec Displays the SNMPv1 and SNMPv2c
community strings and their settings.
“SHOW SNMP-SERVER GROUP” on
page 196 Privileged Exec Displays the SNMPv3 groups and
their settings.
“SHOW SNMP-SERVER USER” on
page 198 Privileged Exec Displays the SNMPv3 users and their
settings.
“SHOW SNMP-SERVER VIEW” on
page 199 Privileged Exec Displays the SNMPv3 views and their
settings.
“SNMP-SERVER” on page 200 Global
Configuration Enables the SNMPv1, SNMPv2c, and
SNMPv3 agent on the switch.
“SNMP-SERVER COMMUNITY” on
page 201 Global
Configuration Creates new SNMPv1 and SNMPv2c
community strings.
“SNMP-SERVER CONTACT” on
page 202 Global
Configuration Sets the value of the MIB object
sysContact.
“SNMP-SERVER ENABLE TRAP” on
page 203 Global
Configuration Activates the transmission of
authentication traps, RMON traps, or
both.
“SNMP-SERVER ENGINEID LOCAL”
on page 205 Global
Configuration Sets or modifies the user-defined
SNMPv3 engine ID.
“SNMP-SERVER GROUP” on
page 206 Global
Configuration Creates SNMPv3 groups.
“SNMP-SERVER HOST” on page 208 Global
Configuration Adds a trap or inform recipient.
“SNMP-SERVER LOCATION” on
page 210 Global
Configuration Sets or modifies the value of the MIB
object sysLocation.
“SNMP-SERVER USER” on page 211 Global
Configuration Creates a new SNMPv3 user.
“SNMP-SERVER VIEW” on page 213 Global
Configuration Creates an SNMP view.
“SNMP TRAP LINK-STATUS” on
page 214 Port Interface Configures SNMP to transmit link
status traps when ports establish links
or lose links to network devices.
Table 27. SNMPv1, SNMPv2c, SNMPv3 Commands (Continued)
Command Mode Description