Allied Telesis AT-DC2552XS - Manual (Page 482)

Chapter 21: Quality of Service (QoS) Commands
482 Section V: Security and Traffic Control
Examples
This example creates a policy map called “pmap1,” then associates a
class map called “cmap5” to policy map “pmap1”:
awplus> enable
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)# class cmap5
awplus(config-pmap-c)#
This example deletes an association between a class-map called “cmap5”
and policy map called “pmap1”:
awplus> enable
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)# no class cmap5