Allied Telesis AT-DC2552XS - Manual (Page 519)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section V: Security and Traffic Control 519
SHOW MLS QOS INTERFACE
Syntax
show mls qos interface port_ids
Parameter
port_ids
Specifies a port ID or multiple port IDs. Use a comma (,) to
separate port IDs and a hyphen (-) to indicate a range of port IDs.
Mode
Privileged Exec mode
Description
Use this command to display the QoS settings of the specified ports. See
Figure 78 for an example of the command output.
Figure 78. SHOW MLS QOS INTERFACE Command
Interface: port1.0.1
INPUT-POLICY-MAP-NAME: pacl10
CLASS-MAP-NAME: default
CLASS-MAP-NAME: permitSA10
QOS-ACCESS-LIST-NAMT: SA10
Match TCP Flags: ack syn
CLASS-MAP-NAME: denyS10
QOS-ACCESS-LIST-NAME: S10
Match TCP Flags: syn
Default CoS: 3
Number of egress queue: 8
Egress Queue: 0
Status: Enabled
Scheduler: Weighted Round Robin
Weight: 1
Queue Limit: -
Egress Rate Limit: 30720 kb
Egress Queue: 1
Status: Enabled
Scheduler: Weighted Round Robin
Weight: 1
Queue Limit: -
Egress Rate Limit: 30720 kb