Allied Telesis AT-DC2552XS - Manual (Page 512)

Chapter 21: Quality of Service (QoS) Commands
512 Section V: Security and Traffic Control
Examples
The following example applies policy map “pmap1” to port 1.0.5:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.5
awplus(config-if)# service-policy input pmap1
The following example applies the policy map “pmap2” to port 1.0.12:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.12
awplus(config-if)# service-policy input pmap2
The following example removes the application between policy map
“pmap3” and port 1.0.17:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.17
awplus(config-if)# no service-policy input pmap3