Allied Telesis AT-DC2552XS - Manual (Page 475)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section V: Security and Traffic Control 475
SHOW INTERFACE ACCESS-GROUP
Syntax
show interface port_ids access-group acl_name
Parameters
port_ids
Specifies a port ID or multiple port IDs. Use a comma (,) to
separate port IDs and a hyphen (-) to indicate a range of port IDs.
acl_name
Specifies the name of a hardware ACL.
Mode
Privileged Exec mode
Description
Use this command to display the port assignments of the hardware ACLs.
See Figure 73 for an example of the command output.
Figure 73. SHOW INTERFACE ACCESS-GROUP Command
Example
This example displays a hardware ACL for ports 1.0.1 and 1.0.2:
awplus# show interface port1.0.1,port1.0.2 access-group
Interface port1.0.1
access-group acl_10
Interface port1.0.2
access-group acl_10