Allied Telesis AT-DC2552XS - Manual (Page 199)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 199
SHOW SNMP-SERVER VIEW
Syntax
show snmp-server view
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the SNMPv3 views on the switch. See
Figure 39 for an example.
Figure 39. SHOW SNMP-SERVER VIEW Command
The fields are described in Table 32.
Example
The following example displays the SNMPv3 views on the switch:
awplus# show snmp-server view
Table 32. SHOW SNMP-SERVER VIEW Command
Field Description
View Name Displays the view name.
OID Displays the OID to a section of the MIB
tree.
Type Displays the view type, which is included.
SNMP V3 View information:
View Name ............. most
OID ................ 1.3.6.1
Type ............... included
View Name ............. standard
OID ................ 1.3.6.1.2.1
Type ............... included