Log host time – Allied Telesis AT-DC2552XS User Manual
Page 165
AT-DC2552SX Switch Command Line Interface User’s Guide
165
LOG HOST TIME
Syntax
log host
ipv4_address
time local|local-offset|utc-offset
plus|minus
hours
Parameters
ipv4_address
Specifies the IPv4 address of the syslog server.
local
Specifies that the time settings of the switch and syslog server are
the same. This is the default setting. When specifying the key word
“local,” do not specify any of the following parameters.
local-offset
Specifies that the time settings of the switch and syslog server are
different. Specify the time difference with the plus or minus key
words followed by the number of hours.
utc-offset
Specifies the time setting for the syslog server and the Coordinated
Universal Time (UTC) are different. Specify the time difference with
the plus or minus key words followed by the number of hours.
plus
Adds the number of hours to the local-offset or utc-offset.
minus
Subtracts the number of hours from the local-offset or utc-offset.
hours
Specifies the number of hours that you want to add to or subtract
from the local-offset or utc-offset. The range is 1 to 24.
Mode
Global Configuration mode
Description
Use this command to specify the time for the event messages that are sent
to the syslog server. When the time settings of the switch and the syslog
server are different, the switch uses the time specified by this command
for event messages sent to the syslog server.