Allied Telesis AT-DC2552XS - Manual (Page 26)

Chapter 1: AlliedWare Plus™ Command Line Interface
26 Section I: Switch Management
Moving Down the Hierarchy
To move down the mode hierarchy, you must step through each mode in
sequence.
Each mode has a different command. For instance, to move from the User
Exec mode to the Privileged Exec mode, you use the ENABLE command.
Here are some examples.
ENABLE
Command
You use this command to move from the User Exec mode to the
Privileged Exec mode. The format of the command is:
enable
Figure 2. ENABLE Command
CONFIGURE
TERMINAL
Command
You use this command to move from the Privileged Exec mode to the
Global Configuration mode. The format of the command is:
configure terminal
Figure 3. CONFIGURE TERMINAL Command
CLASS-MAP
Command
You use this command to move from the Global Configuration mode to the
Class-Map mode in which you create classifiers and flow groups for
Quality of Service policies. The format of the command is:
class-map class_name
Figure 4. CLASS-MAP Command
awplus> enable
awplus#
awplus> enable
awplus# configure terminal
awplus(config)#
awplus(config)# class-map filecopy
awplus(config-cmap)#