Allied Telesis AT-DC2552XS - Manual (Page 295)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 295
SHOW LACP SYS-ID
Syntax
show lacp sys-id
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the LACP priority value and MAC address of
the switch. See Figure 54 for an example of the command output.
Figure 54. SHOW LACP SYS-ID Command
The fields are described in Table 51.
Example
This example displays the LACP priority value and MAC address of the
switch:
awplus# show lacp sys-id
Table 51. SHOW LACP SYS-ID Command
Field Description
System Priority Displays the LACP system priority of the switch.
The value is displayed as both a hexadecimal and
an integer.
MAC Address DIsplays the MAC address of the switch.
System Priority: 0x0080 (32768)
Mac Address: 00-E0-0C-02-10-FD