Allied Telesis AT-DC2552XS - Manual (Page 223)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section I: Switch Management 223
RMON EVENT
Syntax
rmon event event_index type [description description ]
[owner owner ]
Parameters
event_index
Specifies the index number of the event. The range is 1 to 65,535.
type
Specifies the event type (eventType). The options are:
– log:
– trap community :
– log trap community :
description
Specifies the description of the event (eventDescription). The
description can be up to 120 alphanumeric characters.
owner
Specifies the owner of the event (eventOwner). The description
can be up to 120 alphanumeric characters.
Mode
Port Interface mode
Description
Use this command to defines RMON events for RMON alarms. RMON is a
standard monitoring specification, which is an extension of the SNMP MIB.
You must create RMON events before creating RMON alarms. See
“RMON ALARM” on page 219.
Configuring RMON is more common and easier using an SNMP manager
than using the CLI commands on the switch.
Confirmation Command
“SHOW RMON EVENT” on page 225