Allied Telesis AT-DC2552XS - Manual (Page 409)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section III: IPv4 Management 409
NO IP ADDRESS
Syntax
no ip address
Parameters
None
Mode
VLAN Interface mode
Description
Use this command to delete the current IPv4 management address from a
VLAN interface or management Ethernet port eth0. In addition, you can
use this command to delete an IPv4 management address assigned with
the IP ADDRESS DHCP command.
Confirmation Commands
“SHOW IP INTERFACE” on page 412 and “SHOW IP ROUTE” on
page 413
Example
This example removes the static IPv4 management address from the
VLAN with the VID 1:
awplus> enable
awplus# configure terminal
awplus(config)# interface vlan1
awplus(config-vlan)# no ip address