Allied Telesis AT-DC2552XS - Manual (Page 156)

Chapter 6: Boot Configuration File Commands
156 Section I: Switch Management
WRITE
Syntax
write
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to save the configuration file (running-config file) stored
on the RAM as the startup-config file stored on the NVRAM on the switch.
This command is equivalent to the COPY RUNNING-CONFIG STARTUP-
CONFIG, WRITE MEMORY, or WRITE FILE command.
Confirmation Command
“SHOW STARTUP-CONFIG” on page 155
Example
This example saves the running configuration file:
awplus# write