Allied Telesis AT-DC2552XS - Manual (Page 275)

AT-DC2552SX Switch Command Line Interface User’s Guide
Section II: Layer 2 Switching 275
SHOW STORM-CONTROL
Syntax
show storm-control [ port_ids ]
Parameter
port-ids
Specifies a port ID or multiple port IDs. Use a comma (,) to
separate port IDs and a hyphen (-) to indicate a range of port IDs.
Modes
Privileged Exec mode
Description
Use this command to display the current settings of storm control. The
command displays the specified maximum number of broadcast,
multicast, and unknown unicast packets per second. See Figure 50 for an
example of the information.
Figure 50. SHOW STORM-CONTROL Command
The fields are described in Table 46.
Table 46. SHOW STORM-CONTROL Command
Field Description
Port Indicates the port ID.
BcastLevel Indicates the specified maximum number of
ingress broadcast packets per second.
McastLevel Indicates the specified maximum number of
ingress multicast packets per second.
DifLevel Indicates the specified maximum number of
ingress multicast packets per second.
Port BcastLevel McastLevel Dlflevel
Port1.0.1 3000000 5000000 7000000
Port1.0.2 3000000 5000000 7000000
Port1.0.3 3000000 5000000 7000000
....