MITSUBISHI ELECTRIC Mitsubishi Programmable Logic Controller QD75D - Manual (Page 707)

Appendix - 65
MELSEC-Q
APPENDICES
Item A1SD75 QD75
Step valid flag Cd.26 Cd.35
Step mode Cd.27 Cd.34
Step start information Cd.28 Cd.36
Skip command Cd.29 Cd.37
New torque value Cd.30 Cd.22
Positioning starting point No. Cd.31 Cd.4
Interrupt request during continuous operation Cd.32 Cd.18
Simultaneous starting axis start data No. (Axis 1 start data No.) – Cd.30
Simultaneous starting axis start data No. (Axis 2 start data No.) – Cd.31
Simultaneous starting axis start data No. (Axis 3 start data No.) – Cd.32
Simultaneous starting axis start data No. (Axis 4 start data No.) – Cd.33
Teaching data selection – Cd.38
Teaching positioning data No. – Cd.39
New acceleration time value Cd.33 Cd.10
New deceleration time value Cd.34 Cd.11
Acceleration/deceleration time change during speed change, enable/disable selection Cd.35 Cd.12
Stop command processing for deceleration stop selection – Cd.42
Deceleration start flag valid – Cd.41