Debug processor, Hostname – Enterasys Networks X-Pedition XSR CLI User Manual
Page 93
Other Platform Commands
XSR CLI Reference Guide 3-87
Example
XSR(config)#cpu-utilization
debug processor
This command defines a method to force forwarding engine jobs to a specific CPU or allows the
jobs to float between available CPUs.
Syntax
debug processor {number | job type | interface | mobility}
Mode
Privileged EXEC:
XSR#
Examples
The following example forces CPU 0 to accept forwarding jobs input to F1:
XSR#debug processor 0 Input FE1 FIXED
Input Job for Interface FastEthernet 1 is now fixed to Processor #0
This example forces CPU 1 to accept protocol forwarding jobs on interface F2:
XSR#debug processor 1 Protocol FE2 FIXED
Protocol Job for Interface FastEthernet 2 is now fixed to Processor #1
hostname
This command sets the system network name on the CLI prompt.
Syntax
hostname name
Syntax of the “no” Form
The no form of this command deletes the configured hostname:
no hostname
Mode
Privileged EXEC:
XSR#
Default
The name that is stored in Bootrom.
number
CPU: 0 or 1.
job type
Input, Output, or Protocol.
interface
The specified interface.
mobility
Fixed (assign to a CPU and port) or floating (XSR assigns CPU and port).
name
Name of the XSR that appears at the CLI prompt.