Enterasys Networks X-Pedition XSR CLI - Manual (Page 508)

QoS Show Commands
12-112 Configuring Quality of Service
Sample Output
This following commands configure shape information for each class. In the following example
policy‐map shape is configured as follows:
XSR(config)#policy-map Shape
XSR(config-pmap)#class d32
XSR(config-pmap-c)#bandwidth per 30
XSR(config-pmap-c)#shape 400000 50000
XSR(config-pmap-c)#class d33
XSR(config-pmap-c)#bandwidth per 30
XSR(config-pmap-c)#shape 100000 12500
The following is sample output displays shape information for classes d32 and d33:
XSR# show shape interface serial 1/0:0
Serial 0/1/0:0
output: Shape
Serial 0/1/1:1
output: Shape
Class d32
Traffic shaping
Average Normal Exceed Refresh Refresh
Rate Burst Burst Time Bytes
400000 50000 0 10(ms) 500
Class d33
Traffic shaping
Average Normal Exceed Refresh Refresh
Rate Burst Burst Time Bytes
100000 12500 0 10(ms) 125
Parameter Descriptions
Average Rate Average shaped rate configured.
Normal burst Configured normal burst.
Exceed burst Configured exceed burst.
Refresh time Time interval of bucket refill with tokens.
Refresh bytes Number of bytes added to the bucket per time interval.