Enterasys Networks X-Pedition XSR CLI - Manual (Page 623)

DHCP Clear and Show Commands
XSR CLI Reference Guide 15-113
Parameter Descriptions
show interface
This command displays DHCP interface’s IP address and subnet mask. When negotiating, the
interface will indicate ʺInternet address is not assignedʺ.
Syntax
show interface
Examples
The following example does not display the DHCP assigned address while the protocol is
negotiating:
XSR#show interface
FastEthernet 1 is Admin Up
Internet address is not assigned
The following example displays the DHCP assigned address when the protocol has finished
negotiation:
xsr#show interface
FastEthernet 1 is Admin Up
Internet address is 172.16.1.1, subnet mask is 255.255.255.0
Temp IP addr IP address assigned via DHCP to the client from the server.
Temp sub net mask Subnet mask assigned via DHCP to the client from the server.
Temp default-gateway addr Default gateway assigned by the DHCP server.
State DHCP Client FSM state:
• 0 ‐ None
• 1 ‐ REBOOTING
• 2 ‐ INIT
• 3 ‐ SELECTING
• 4 ‐ REQUESTING
• 5 ‐ BOUND
• 6 ‐ RENEWING
• 7 ‐ REBINDING
• 8 ‐ STOPPED
• 9 and others ‐ NOTVALID
DHCP Lease Server DHCP server IP address and name.
DNS Server DNC server IP address.
DHCP Transaction ID Transaction ID for current DHCP offer from the server.
Lease/ Renewal/ Rebind Current lease, renewal, and rebind periods.
Next timer fires after Timer for the next time DHCP renew request.